The quality of the salmon is important. This particular one came from The Catch in Cornelscourt.
Pricey but great quality. It works out well with a side of salmon from the supermarket. I got the skin removed but this is not really necessary.
The previous day, prepare the cure. It consists of 200g of a nice brown sugar and 200g of table salt. Give it a good mix.
Sprinkle some on the base of the vessel you are using with the cure Place the fish on top, one piece at a time. Cover the first piece of fish with the cure. cure the bottom of the second piece with the cure and place the cured side on top of the first piece. cover with the remaining cure. The green colour is just a shadow.
I used a smaller lid to cover the salmon and placed a number of tins on top to press down on the fish. Pop it the fridge for 12 to 24 hours. I left it there for about 15 hours.
The next day, wash all the cure off the fish and dry it with kitchen towels. Put the fish on a rack and let it thoroughly dry for about 6 hours. This forms a pellicle which is a thin layer of protein which allows the smoke to better adhere the surface of the meat during the smoking process.
Time to start the BBQ. Unless you are a very strange person and cleans you BBQ grills every time you use it, put it on full to burn off the old crud and brush it off when it is carbonized. Reduce the heat. I heated the left side of the BBQ and waited for the temperature of the BBQ to be about 150C (300F).
I got some Mesquite chips in Newlands Garden Centre, when I was there recently. Any type of BBQ wood chips would do. Only hardwood though because softwood produces a tar which would be nasty and some other ones can be toxic.
I had one of these BBQ Smoker Boxes. They can be purchased in B&Q, I believe. Also from the usual online fellas, such as the A guy.
I soaked the chips for about an hour in water then put it on the BBQ and waited for about 30 mins for the smoke to start. You need to have the wood smoking before you put the fish in.
Another thing you will need is a temperature probe. One with a long cable so you can have the display outside the BBQ.
Here we go......
When it reaches 75C (160F), it is done. This is the completed product. Looks nice.
Post a Comment